Nationally Recognised Training

Promed International (RTO #40705) t/a Inertia Training

Operate EWP

Under 11 Metres

The standalone EWP qualification for workers who already hold a current heights ticket — covering pre-operational checks, safe operation and emergency procedures for scissor lifts, vertical lifts and small boom EWPs.
}

1 Day

0

2-Year Renewal

h

Heights Ticket Required

EWP Operators

1

Unit of competency

1 Day

Face-to-face

2 yrs

Renewal recommended

RII / TLI

Training package

ABOUT THIS COURSE

Operate Elevating Work Platform Under 11m delivers the standalone RIIHAN301E qualification for workers who already hold a current Work Safely at Heights ticket and need the EWP component on its own.

This course is for EWPs under 11 metres only — scissor lifts, vertical mast lifts and small articulated boom lifts. Above 11 metres, a High Risk Work Licence (HRWL) is required — see Operate Elevating Work Platform Over 11m for that pathway.

A current Work Safely at Heights qualification (RIIWHS204E) is a prerequisite for this standalone course. If you do not hold heights, see the combined Heights + EWP pathway in our Height Safety group.

Units of Competency

What’s Included

Your Statement of Attainment will cover the following nationally recognised unit:

RIIHAN301E
Operate elevating work platform

What You Will Learn

Course Content

This course covers the following knowledge and practical skills:
  • EWP types — scissor lifts, vertical mast lifts and articulated boom lifts under 11m
  • EWP components — chassis, controls, safety systems and emergency stop
  • Pre-operational inspection of an EWP — systematic checks before use
  • Logbook and service records — what to check and how to record findings
  • Site assessment — ground bearing, slopes, overhead obstructions
  • Setting up exclusion zones around EWP operations
  • Platform and ground controls — when and how to use each
  • Safe driving and positioning of an EWP on level and inclined surfaces
  • Load calculations — platform capacity, reach and weight distribution
  • Wind speed limitations and weather conditions for outdoor use
  • Working near powerlines — safe approach distances
  • Harness use and connection within an EWP basket
  • Emergency procedures — entrapment, emergency lowering and rescue
  • Post-operational checks and equipment storage

Assessment

How You’ll Be Assessed

Assessment combines written knowledge questions with supervised practical performance tasks completed during the course.

Practical Performance Tasks

1
Conduct a pre-operational inspection of an EWP and complete the logbook
2
Conduct a site and ground assessment for EWP setup
3
Set up exclusion zones and signage around an EWP work area
4
Operate an EWP safely — drive, position and elevate to a work position
5
Connect harness to designated anchor inside an EWP basket
6
Demonstrate safe operation of platform and ground controls
7
Demonstrate emergency lowering procedure for an EWP
8
Complete post-operational checks and equipment shutdown

Written Assessment

Knowledge assessment covering EWP types, pre-operational inspection, site assessment, controls, working near powerlines and emergency procedures.

Who Should Attend

Is This Course Right for You?

  • Workers who hold a current heights ticket and need EWP qualification only
  • Construction, civil and infrastructure workers using EWPs under 11m
  • Maintenance technicians, painters and signage installers
  • Warehouse and logistics workers using vertical lifts and scissor lifts
  • Trades requiring access at height — electrical, mechanical, HVAC
  • Anyone needing EWP currency for site access or insurance compliance
}

Course Details

Course Code
RIIHAN301E
Training Package
Promed Training
Duration
1 Day
Delivery
Face-to-face / Blended
Location
Your workplace or our venue
Certification
Statement of Attainment
Valid for
2 years (recommended)
Prerequisite
N/A
Z

Entry Requirements

  • Current Work Safely at Heights (RIIWHS204E) — REQUIRED prerequisite
  • Minimum 16 years of age recommended
  • Physical capacity to fit and work in a full body harness at height
  • Appropriate footwear and clothing — closed-in shoes, long pants
  • Valid Unique Student Identifier (USI) required for certification
p

USI Required

A Unique Student Identifier (USI) is required to receive your Statement of Attainment. If you don’t already have a USI visit www.usi.gov.au to create yours.

Ready to Book?

Group bookings available — we come to you, or you come to us.

How We Deliver

Flexible Training Options

We come to you, or you come to us.

group bg 4

Face-to-Face

Full day — minimum contact time as per unit

All theory, practical training and assessment completed in a single session with your trainer.

group bg 4

Blended Learning

Reduced face-to-face — theory completed online

Complete theory at your own pace online, then attend a practical skills and assessment session.

group bg 4

Workplace / Onsite

We come to you – any format

We deliver at your workplace. Ideal for groups – custom scheduling including outside business hours.